Chevrolet Chevette/1000 1976-1988 Repair Guide

Instrument Cluster

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1You must remove the instrument cluster to access the gauges



Click image to see an enlarged view

Fig. Fig. 2Unfasten the instrument cluster bezel retaining screws



Click image to see an enlarged view

Fig. Fig. 3Make sure to remove all the screws ...



Click image to see an enlarged view

Fig. Fig. 4... then remove the instrument cluster bezel



Click image to see an enlarged view

Fig. Fig. 5Remove the instrument cluster lens



Click image to see an enlarged view

Fig. Fig. 6Unfasten the cluster-to-panel retaining screws



Click image to see an enlarged view

Fig. Fig. 7Carefully pull the instrument cluster slightly forward then ...



Click image to see an enlarged view

Fig. Fig. 8... detach the wiring and speedometer cable. Remove the cluster from the vehicle

The instrument cluster must be removed to replace light bulbs, gauges, and printed circuit.

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the clock stem knob.
  4.  
  5. Remove the four screws and remove the instrument cluster bezel and lens.
  6.  
  7. Remove the two nuts securing the instrument cluster to the instrument panel and pull the cluster slightly forward.
  8.  
  9. Disconnect the electrical connector and speedometer cable from the cluster and remove it.
  10.  
  11. Installation is the reverse of removal.
  12.  

 
label.common.footer.alt.autozoneLogo