REMOVAL & INSTALLATION
Fig. Fig. 1Front seat-to-floor pan attachments-standard seats shown
Fig. Fig. 2Seat adjuster-to-seat frame components
Fig. Fig. 3Recliner control mechanism-passenger seat shown, driver side similar
Fig. Fig. 4Use a suitable pair of locking pliers to remove the front seat adjuster control knob
Fig. Fig. 5With the front seat removed from the car, you can perform the front seatback inertia lock check
Fig. Fig. 6Manual seat adjuster diagnosis chart
Operate the seat to the full-forward position.
At the rear of the adjusters, remove the adjuster-to-floor pan rear covers and nuts. Operate the seat to the full-rearward position. Remove the adjuster-to-floor pan front nuts.
Remove the seat from the car.
Installation is the reverse of the removal procedure. When installing the seat, tighten the seat adjuster-to-floor pan attaching nuts to 15-21 ft. lbs.