Chevrolet Chevette/1000 1976-1988 Repair Guide

Inside Remote Handle

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1Installation of the inside remote handle



Click image to see an enlarged view

Fig. Fig. 2Disengage the connecting rod spring clip from the remote handle, then disconnect the rod

  1. Remove the door trim pad and detach the inner panel water deflector enough to gain access to the remote handle.
  2.  
  3. Disengage the connecting rod spring clip at the remote handle and disconnect the rod.
  4.  
  5. Punch out the center pin of the attaching rivet, then drill out the rivet using a 3 / 16 " drill.
  6.  
  7. Slide the remote handle forward to disengage the front retaining tab and remove.
  8.  
  9. To install, reverse the removal procedure. Use a steel rivet 3 / 16 "X 5 / 16 " to attach the remote handle.
  10.  

 
label.common.footer.alt.autozoneLogo