Chevrolet Chevette/1000 1976-1988 Repair Guide

Lock Cylinder

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1Door lock cylinder removal and installation

  1. Raise the door window.
  2.  
  3. Remove the door trim panel and detach the inner panel water deflector enough to expose the rear access hole.
  4.  
  5. Using a suitable tool, slide the lock cylinder retaining clip (on the door outer panel) out of engagement and remove the lock cylinder pawl assembly from outside of the door.
  6.  
  7. Installation is the reverse of removal. Be sure to engage the lock cylinder pawl with the lock lever before engaging the retaining clip.
  8.  

Black lock cylinders should be lubricated with light oil. All other lock cylinders should be lubricated with a general purpose silicone.

 
label.common.footer.alt.autozoneLogo