Chevrolet Chevette/1000 1976-1988 Repair Guide

Front Parking Lights, Turn Signals and Side Marker Lights

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1On later model vehicles with square headlights, unfasten the screws



Click image to see an enlarged view

Fig. Fig. 2Remove the retaining ring ...



Click image to see an enlarged view

Fig. Fig. 3... then carefully pull the headlight out, detaching the electrical connector



Click image to see an enlarged view

Fig. Fig. 4For most side marker lights, unfasten the retaining screws ...



Click image to see an enlarged view

Fig. Fig. 5... then remove the side marker light assembly



Click image to see an enlarged view

Fig. Fig. 6Pull the bulb from the socket and replace if it is burned out

  1. The bulb socket for earlier models is reached from under the front bumper or under the front wheel well.
  2.  
  3. On some vehicles, remove the screws, then lift the light assembly off.
  4.  
  5. Turn the bulb socket counterclockwise 90° and lift out.
  6.  
  7. Pull the bulb out of the socket and replace it with a new bulb. Test the operation of the bulb.
  8.  
  9. Replace the bulb socket in the housing and turn it clockwise 90° to lock it in place.
  10.  
  11. If equipped, install the parking light assembly and secure with the retaining screws.
  12.  

 
label.common.footer.alt.autozoneLogo