Chevrolet Chevette/1000 1976-1988 Repair Guide

Rear Parking Lights and Turn Signals

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1Block-out panel removal and installation



Click image to see an enlarged view

Fig. Fig. 2If there is no access from inside the car, unfasten the retaining screws



Click image to see an enlarged view

Fig. Fig. 3Remove the rear brake/parking light assembly ...



Click image to see an enlarged view

Fig. Fig. 4... then pull the bulbs out of their sockets

  1. On the inside of the car, remove the blockout panel.
  2.  
  3. Remove the bulb from the socket and replace as necessary.
  4.  
  5. To install, reverse the procedure.
  6.  

 
label.common.footer.alt.autozoneLogo