Chevrolet Citation/Omega/Phoenix/Skylark 1980-1985 Repair Guide

Rear Hub and Bearing

Print

REMOVAL & INSTALLATION



  1. Loosen the wheel lug nuts. Raise and support the car and remove the wheel.
  2.  
  3. Remove the brake drum. Removal procedures are covered in the next section, if needed.
  4.  


WARNING
Do not hammer on the brake drum to remove; damage to the bearing will result.

  1. Remove the four hub and bearing retaining bolts and remove the assembly from the axle.
  2.  
  3. Installation is the reverse. Hub and bearing bolt torque is 35 ft. lbs. (55 Nm).
  4.  

 
label.common.footer.alt.autozoneLogo