Chevrolet Full-size Cars 1968-1978 Repair Guide

Control Head

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1 Schematic of the heater/defroster airflow

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the radio knobs and the clock set knob, as required.
  4.  
  5. Remove the instrument bezel retaining screws.
  6.  
  7. Pull the bezel out to disconnect the rear defogger switch and the remote mirror control, as required.
  8.  
  9. Remove the instrument panel retaining screws.
  10.  
  11. Remove the control head to dash screws and pull the head out.
  12.  
  13. Disconnect the electrical connectors and/or control cables. Remove the control head.
  14.  
  15. Installation is the reverse of the removal procedure.
  16.  

 
label.common.footer.alt.autozoneLogo