Chevrolet Full-size Cars 1968-1978 Repair Guide

Back-up Light Switch

Print

REMOVAL & INSTALLATION



Column Mounted
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the steering column lower trim panel, if equipped.
  4.  
  5. Disconnect the switch electrical connections. Remove the switch retaining screws.
  6.  
  7. Remove the switch from its mounting on the steering column.
  8.  
  9. Installation is the reverse of the removal procedure.
  10.  

Console Mounted
  1. Disconnect the negative battery cable.
  2.  
  3. As required, remove the console or the shift selector trim panel in order to gain access to the switch assembly.
  4.  
  5. Disconnect the electrical connectors from the switch assembly.
  6.  
  7. Remove the switch retaining screws. Remove the switch from its mounting.
  8.  
  9. Installation is the reverse of the removal procedure.
  10.  

 
label.common.footer.alt.autozoneLogo