Chevrolet Full-size Cars 1968-1978 Repair Guide

Headlight Switch

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1 Depress the shaft retainer to release the shaft and control knob



Click image to see an enlarged view

Fig. Fig. 2 Various auxiliary switch mounting points

  1. Disconnect the negative battery cable. As required, remove the steering column trim cover.
  2.  
  3. Pull the headlight control knob to the ON position.
  4.  
  5. Reaching up under the instrument panel, depress the switch shaft release button, then pull the shaft and the control knob out.
  6.  
  7. Remove the ferrule nut and the switch from the instrument panel.
  8.  
  9. Disconnect the multi-contact electrical connector from the switch.
  10.  
  11. Installation is the reverse of the removal procedure.
  12.  

 
label.common.footer.alt.autozoneLogo