REMOVAL & INSTALLATION
Fig. Fig. 1 Exploded view of the wiper motor and headlight switch assemblies
Fig. Fig. 2 Pull the headlight control knob to the ON position and remove the knob from the wiper switch
Fig. Fig. 3 Reach behind the dash and press the shaft release button and remove the headlight control knob
Fig. Fig. 4 Carefully pry out on the switch mounting panel
Fig. Fig. 5 Once the panel is unfastened from the dashboard, remove the wiper switch bulb ...
Fig. Fig. 6 ... and unplug the wiper switch electrical connector
Disconnect the negative battery cable.
Remove all required trim and instrument, or steering column panel bezels in order to remove the switch.
Disconnect the electrical connectors from the switch assembly.
Remove the switch retaining screws.
Installation is the reverse of removal.
Check the switch operation when finished.