REMOVAL & INSTALLATION
Fig. Fig. 1 Rear window assembly for 1968-70 coupe style vehicles
Fig. Fig. 2 Rear window assembly for 1971-76 coupe style vehicles
Disconnect the negative battery cable. Remove the trim panel. Raise the window to the full up position and tape the glass to the door frame.
Remove the lower sash channel retaining bolts. Lower the window to the full down position. Remove the regulator sash.
Disengage the front edge of the glass from the glass channel retainer. Slide the glass forward and tilt it up slightly.
Using care, remove the glass from its mounting.
Installation is the reverse of the removal procedure. Before installing the trim panel, check for proper window operation.