Chevrolet Full-size Cars 1968-1978 Repair Guide

Stabilizer Bar

Print

REMOVAL & INSTALLATION



  1. Raise and support the rear of the vehicle on jackstands under the frame.
  2.  
  3. Support the axle assembly with a floor jack.
  4.  
  5. Remove the stabilizer bar-to-lower control arm bolts and the stabilizer bar.
  6.  
  7. To install, reverse the removal procedures. Torque the stabilizer bar-to-lower control arm to 35 ft. lbs.
  8.  

 
label.common.footer.alt.autozoneLogo