Chevrolet Nova/ChevyII 1962-1979

Power Seat Motor

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable. Disconnect the electrical harness connector.
  2.  
  3. Remove the seat retaining bolts. Remove the seat from the vehicle. Place it upside down on a protected workbench.
  4.  
  5. Disconnect the motor feed wires from the motor control relay.
  6.  
  7. Remove the motor mounting screws and the transmission-to-motor screws, then move the motor away to disengage it from the rubber coupling.
  8.  
  9. Installation is the reverse of the removal procedure.
  10.  

When installing the motor, make sure that the rubber coupling is properly engaged at the motor and the transmission.

 
label.common.footer.alt.autozoneLogo