Chrysler Caravan/Voyager/Town and Country 1996-1999

Torque Tube

Print

REMOVAL & INSTALLATION



  1. Raise and safely support the vehicle.
  2.  
  3. Remove the rear driveline module assembly from the vehicle.
  4.  
  5. Remove the viscous coupling, snapring and torque tube bearing shield.
  6.  
  7. Remove torque tube to overrunning clutch case bolts.
  8.  
  9. Slide the torque tube off of the torque shaft.
  10.  

To install:
  1. Engage the torque tube onto the torque shaft. Install the torque tube to the overrunning clutch case bolts, tightening to 21 ft. lbs. (28 Nm).
  2.  
  3. Install the bearing shield and snapring.
  4.  
  5. Install the viscous coupling.
  6.  
  7. Install the driveline module into the vehicle. Lower The vehicle.
  8.  

 
label.common.footer.alt.autozoneLogo