Chrysler Caravan/Voyager/Town n Country 1984-1995

Blower Motor Resistor

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the middle bench, if equipped. Remove the left lower quarter trim panel.
  4.  
  5. Disconnect the wiring harness from the resistor.
  6.  
  7. Remove the screws that attach the resistor to the rear unit and remove the resistor.
  8.  
  9. The installation is the reverse of the removal procedure.
  10.  
  11. Connect the negative battery cable and check for proper operation.
  12.  

 
label.common.footer.alt.autozoneLogo