Chrysler Caravan/Voyager/Town n Country 1984-1995

Heater Core

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable. Pinch off the hoses to the rear heater core.
  2.  
  3. Raise the vehicle and support safely. Disconnect the underbody heater hoses from the rear heater core tubes.
  4.  
  5. Remove the middle bench, if equipped. Remove the interior left lower quarter trim panel.
  6.  
  7. Remove the 7 screws that attach the air distribution duct to the floor and unit. Pull the distribution duct straight up to remove.
  8.  
  9. Remove the 6 screws from the top surface of the unit and remove the unit cover.
  10.  
  11. Pull the heater core straight up and out of the unit.
  12.  
  13. The installation is the reverse of the removal procedure.
  14.  
  15. Connect the negative battery cable and check for leaks.
  16.  

 
label.common.footer.alt.autozoneLogo