Chrysler Caravan/Voyager/Town n Country 1984-1995

Throttle Position Sensor (TPS)

Print

REMOVAL & INSTALLATION



See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Throttle position sensor removal-2.5L engines

  1. Disconnect negative battery cable.
  2.  
  3. Remove air cleaner.
  4.  
  5. Disengage the 3-way connector at Throttle Position Sensor (TPS).
  6.  
  7. Remove 2 screws mounting TPS to throttle body.
  8.  
  9. Lift the TPS off throttle shaft.
  10.  

To install:
  1. Install throttle position sensor to throttle body, position connector toward rear of vehicle.
  2.  
  3. Engage the 3-way connector at the TPS.
  4.  
  5. Install air cleaner.
  6.  
  7. Connect negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo