Chrysler Caravan/Voyager/Town n Country 1984-1995

Tail Pipe

Print

REMOVAL & INSTALLATION



  1. Raise the vehicle and properly support on jackstands.
  2.  
  3. Apply penetrating oil to the clamp bolts, nuts and connecting points of the section of the system to be removed.
  4.  
  5. Remove the support saddle type clamp assembly from the tail pipe-to-muffler connecting point.
  6.  
  7. Remove the U-nut and shoulder bolts from the tail pipe mid-point and rear tail pipe bracket.
  8.  
  9. When removing the tail pipe, raise the rear of vehicle enough to provide clearance between pipe and rear axle parts.
  10.  
  11. Remove the tail pipe from muffler.
  12.  

To install:
  1. Clean the muffler mating surface with a wire brush.
  2.  
  3. Replace broken or worn insulators, supports or attaching parts.
  4.  
  5. Loosely assemble the tail pipe to muffler, mid-point support and tail pipe bracket. Make certain slot in tail pipe is keyed with key in muffler.
  6.  
  7. Align parts and install support saddle type clamp tighten nuts to 28 ft. lbs. (38 Nm).
  8.  

 
label.common.footer.alt.autozoneLogo