Chrysler Caravan/Voyager/Town n Country 1984-1995

Upper Instrument Panel

Print

REMOVAL & INSTALLATION



See Figure 1

1984-90 Models
  1. If equipped, disable the air bag system by disconnecting the negative battery cable.
  2.  
  3. Separate the lower instrument panel from the upper half (see Steps 1 through 12 of the Lower Instrument Panel procedure).
  4.  
  5. Disconnect the speedometer cable from the engine compartment.
  6.  
  7. Remove (2) nuts at the steering column floating bracket.
  8.  
  9. Disconnect the gear shift selector indicator wire.
  10.  
  11. Disengage the electrical connector at the radio speakers.
  12.  
  13. Remove the radio speaker and defroster grilles.
  14.  
  15. Remove the (2) mounting screws from each side cowl bracket.
  16.  
  17. Remove the (4) upper panel attaching screws from the defroster duct slots and the (2) screws next to the radio speakers.
  18.  
  19. Pull the panel and disconnect the speedometer cable from the speedometer.
  20.  
  21. Remove upper instrument panel from vehicle.
  22.  

To install:
  1. Position the upper instrument panel into the vehicle.
  2.  
  3. Connect the speedometer cable.
  4.  
  5. Install the (6) upper panel attaching screws.
  6.  
  7. Install the cowl bracket retaining screws.
  8.  
  9. Install the radio speaker and defroster grilles.
  10.  
  11. Connect the radio speaker wiring.
  12.  
  13. Connect the gear shift selector indicator wire.
  14.  
  15. Install the retaining nuts at the steering column floating bracket.
  16.  
  17. Connect the speedometer cable in the engine compartment.
  18.  
  19. Install the lower panel to the upper.
  20.  
  21. If equipped, perform the Air bag System Check procedures outlined in this section before connecting the negative battery cable.
  22.  



Click image to see an enlarged view

Fig. Fig. 1: Instrument panel assembly-1984-90 models

 
label.common.footer.alt.autozoneLogo