Chrysler Caravan/Voyager/Town n Country 1984-1995

Front Seats

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1: Front seat and riser removal-1984-95 models



Click image to see an enlarged view

Fig. Fig. 2: Left front seat track and riser assembly-1984-90 models shown



Click image to see an enlarged view

Fig. Fig. 3: Left front seat track and riser assembly-1984-90 models shown

  1. To remove the right front seat; raise and safely support the vehicle.
  2.  
  3. Remove the four nuts and washer that attach the seat to the floor pan.
  4.  
  5. Remove the seat.
  6.  
  7. To remove the left front seat: tilt the seat reward. Reach under the front of the seat and grab the cable near the clip that retains the cable to the lever. Pull the cable toward the driver's door until it is released from the lever assembly.
  8.  
  9. Turn the cable ninety degrees and push it inward to separate the cable from the lever assembly.
  10.  
  11. Disengage the electrical connectors. Remove the mounting nuts and washers and remove the seat.
  12.  

To install:
  1. Position the seat over the mounting holes, then lower it through the holes.
  2.  
  3. Secure the seat with the nuts and washers. Tighten the nuts securely.
  4.  
  5. Attach the electrical wiring and cable.
  6.  
  7. Lower the vehicle, if applicable.
  8.  

 
label.common.footer.alt.autozoneLogo