Chrysler Caravan/Voyager/Town n Country 1984-1995

Boot Seals

Print

REMOVAL & INSTALLATION



  1. Raise and support the front of the vehicle on jackstands.
  2.  
  3. Disconnect the tie rod end from the steering knuckle. Loosen the jam nut and unscrew the end. Count the number of turns required when removing the end.
  4.  
  5. Cut the inner boot clamp, use pliers to expand the outer clamp and remove.
  6.  
  7. Locate and mark for reinstallation, the location of the breather tube.
  8.  
  9. Use a small tool to lift the boot from inner mounting groove and slide boot from the shaft.
  10.  
  11. Install the new boot and clamps. Locate the breather tube to the reference mark. Lubricate the boot and the mounting groove with silicone type lubricant. Install the tie rod end the same number of turns as counted when removing.
  12.  

 
label.common.footer.alt.autozoneLogo