Chrysler Caravan/Voyager/Town n Country 1984-1995

Wiper Arm (Liftgate)

Print

REMOVAL & INSTALLATION



See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Liftgate wiper arm installation-1984-91 models, (for 1992-95 models the measurement is 3.5 in. 89mm)

  1. Insert Tool C-3982, or the equivalent, between the wiper arm and wiper motor output shaft.
  2.  

The use of screwdrivers or prying tools may damaged the spring clip in the base of the arm, while trying to release the arm. Damage of the spring clip will result in the arm coming off the shaft regardless of how carefully it is installed.

  1. Lift the arm and remove it from motor output shaft.
  2.  

To install:
  1. With the wiper motor in the Park position, position the arm on the motor output shaft. Choose a point where the tip of blade is about 1.5 in. (38mm) parallel with the bottom lower edge of liftgate glass.
  2.  
  3. Push the wiper arm onto the motor shaft.
  4.  

 
label.common.footer.alt.autozoneLogo