Chrysler Cirrus/Stratus/Sebring/Avenger/Breeze 1995-1998

Fog/Driving Lights

Print

REMOVAL & INSTALLATION



See Figures 1 through 6

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the fog lamp module from the bumper fascia.
  4.  
  5. Pull the fog lamp module out of the opening in the fascia.
  6.  



Click image to see an enlarged view

Fig. Fig. 1: Remove the fog light module mounting screws



Click image to see an enlarged view

Fig. Fig. 2: Pull the fog lamp out of the front fascia panel and disengage the wiring connector



Click image to see an enlarged view

Fig. Fig. 3: Hold the fog light module and turn the light bulb counterclockwise, ...



Click image to see an enlarged view

Fig. Fig. 4: ... then withdraw the light bulb from the module

  1. Detach the electrical connector from the fog lamp bulb base.
  2.  
  3. Remove the bulb from the lamp.
  4.  

To install:
  1. Install the bulb in the lamp.
  2.  
  3. Attach the electrical connector to the fog lamp bulb base.
  4.  
  5. Place the fog lamp in position on the front fascia and tighten the mounting screws.
  6.  
  7. Connect the negative battery cable.
  8.  



Click image to see an enlarged view

Fig. Fig. 5: Bulb Specifications-Cirrus, Stratus, Sebring Convertible and Breeze



Click image to see an enlarged view

Fig. Fig. 6: Bulb Specifications-Sebring Coupe and Avenger

 
label.common.footer.alt.autozoneLogo