Chrysler Cirrus/Stratus/Sebring/Avenger/Breeze 1995-1998

Transaxle

Print

MANUAL



See Figures 1, 2 and 3

On all models, except the Avenger and Sebring coupe, the transaxle model, assembly number and build date can be found on a metal identification plate which is attached to the end cover of the transaxle. This information is also shown on a bar code label that is secured to the front of the transaxle.

The last eight digits of the VIN are stamped on the case, below the back-up lamp switch.



Click image to see an enlarged view

Fig. Fig. 1: Location of the metal identification tag on the transaxle rear case cover



Click image to see an enlarged view

Fig. Fig. 2: Location of the bar code label on the front of the transaxle

On the Avenger and Sebring coupe, the transaxle model, assembly number and build date can be found on a bar code label that is secured to the front of the transaxle, and up on top of the bell housing.



Click image to see an enlarged view

Fig. Fig. 3: Location of identification labels on the transaxle for Avenger and Sebring coupe

There are four different versions of this transaxle.There aren't any visible differences between the models, so make sure to refer to the ID tag to determine with which transaxle your vehicle is equipped.

AUTOMATIC



See Figures 4 and 5

On 1995 Cirrus and Stratus vehicles, the model, assembly number and build date can be found on an identification tag, which is located on the transaxle case, next to the solenoid assembly.

On all other vehicles, the model, assembly number and build date can be found on a bar code label which is located on the transaxle case, up on the bell housing.



Click image to see an enlarged view

Fig. Fig. 4: Location of the transaxle identification tag next to the solenoid assembly-1995 Cirrus and Stratus



Click image to see an enlarged view

Fig. Fig. 5: Location of the bar code label on top of the transaxle bell housing

 
label.common.footer.alt.autozoneLogo