Chrysler Cirrus/Stratus/Sebring/Avenger/Breeze 1995-1998

Diagnostic Connector

Print

See Figures 1 and 2

The Data Link Connector (diagnostic connector), is a 16-pin connector located inside the vehicle, under the instrument panel and to the left of the steering column. On Sebring coupe and Avenger models only, there are 2 data link connectors: the regular 16-pin connector, along with an additional 12-pin connector. The diagnostic connector is used as a link between the DRB® or equivalent scan tool and the PCM. The PCM communicates with the scan tool through the data link receive and transmit circuits. You can attach the scan tool to the data link connector to access any stored DTC's.



Click image to see an enlarged view

Fig. Fig. 1: On Cirrus, Stratus, Sebring convertible and Breeze models, the data link connector can be found under the dashboard panel, to the left of the steering wheel



Click image to see an enlarged view

Fig. Fig. 2: On Sebring coupe and Avenger models, the data link connectors (16-pin and 12-pin) can be found under the dashboard panel, to the right of the steering wheel, near the center console

 
label.common.footer.alt.autozoneLogo