Chrysler Colt/Vista 1990-1993 Repair Information

Shoulder Belt Retractor

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the shoulder belt tongue plate, guide ring and bezel.
  4.  
  5. Remove the rear console box assembly.
  6.  
  7. Disconnect the outer switch harness connector.
  8.  
  9. Remove the retractor assembly mounting bolts.
  10.  
  11. Remove the left and right retractor brackets and remove the assembly from the vehicle.
  12.  

To install:
  1. Fit the retractor assembly into the vehicle.
  2.  
  3. Fit the brackets and install the mounting bolts.
  4.  
  5. Reconnect the outer switch harness connector.
  6.  
  7. Install the rear console box assembly.
  8.  
  9. Install the bezel, guide ring and shoulder belt tongue plate.
  10.  
  11. Reconnect the negative battery cable.
  12.  

 
label.common.footer.alt.autozoneLogo