Chrysler Colt/Vista 1990-1993 Repair Information

Crank Angle Sensor

Print

REMOVAL & INSTALLATION



See Figure 1

1.6L Engines
  1. Disconnect the negative battery cable.
  2.  



Click image to see an enlarged view

Fig. Fig. 1: Crank angle sensor installation - 1.6L engine

  1. Disconnect the crank angle sensor harness connector.
  2.  
  3. Remove the sensor retaining nut and remove the crank angle sensor.
  4.  
  5. Rotate the engine until No. 1 cylinder is at TDC on its compression stroke.
  6.  
  7. Align the punch mark on the crank angle sensor housing with the notch in plate or coupling.
  8.  
  9. Install the crank angle sensor.
  10.  
  11. Reconnect the crank angle sensor harness connector.
  12.  
  13. Reconnect the negative battery cable.
  14.  

 
label.common.footer.alt.autozoneLogo