Chrysler Colt/Vista 1990-1993 Repair Information
Rocker Arm (Valve) Cover
REMOVAL & INSTALLATION
Remove air cleaner, air cleaner snorkel, mounting brackets and remove plug wires, if necessary. Label vacuum hoses that are disconnected for reinstallation identification.
Disconnect breather hoses and remove cover mounting bolts. Remove valve cover.
Clean all mounting surfaces. Inspect the breather seal, camshaft end seal and valve cover end seals that are mounted on the cylinder head. Replace as necessary.
Install a new valve cover gasket into the mounting slot. Apply RTV sealant to the end seals and install the valve cover. Run engine until normal operating temperature is reached. Shut the engine off and check for oil leaks.