Chrysler Colt/Vista 1990-1993 Repair Information

Blower Motor Resistor or Power Transistor

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the glove box assembly. The resistor or power transistor is accessible through the glove box opening and is mounted to the blower or evaporator case.
  4.  
  5. Disconnect the wire harness from the resistor.
  6.  
  7. Remove the mounting screws and remove the resistor.
  8.  
  9. The installation is the reverse of the removal procedure. Make sure the seal is intact when installing.
  10.  
  11. Connect the negative battery cable and check the entire climate control system for proper operation.
  12.  

 
label.common.footer.alt.autozoneLogo