Chrysler Colt/Vista 1990-1993 Repair Information

Front Combination Light

Print

HOUSING REMOVAL & INSTALLATION BULB REPLACEMENT



Colt

See Figures 1, 2, 3 and 4



Click image to see an enlarged view

Fig. Fig. 1: Disconnecting the retaining spring



Click image to see an enlarged view

Fig. Fig. 2: Pulling the housing from the car



Click image to see an enlarged view

Fig. Fig. 3: Twisting the bulb holder from the housing



Click image to see an enlarged view

Fig. Fig. 4: Pull the bulb from the bulb holder

  1. Open the hood.
  2.  
  3. Reach behind the light and disconnect the retaining spring.
  4.  
  5. Slowly pull the housing assembly from the front of the car and twist and remove the bulb carrier.
  6.  
  7. Remove the bulb from the carrier.
  8.  
  9. Installation is the reverse of removal. Make sure that all the mounting tabs are positioned properly.
  10.  

1992-93 Vista
  1. From inside the engine compartment, remove the combination light housing screws.
  2.  
  3. Pull the housing from the front of the vehicle, twist and remove the bulb holder, and remove the bulb.
  4.  
  5. Installation is the reverse of removal. Make sure that the mounting tabs are positioned properly.
  6.  

 
label.common.footer.alt.autozoneLogo