Chrysler Colt/Vista 1990-1993 Repair Information

Rear Window Wiper Motor

Print

REMOVAL & INSTALLATION



See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Rear window wiper system - 1992-93 Vista

  1. Remove the wiper blade and arm. The arm is retained by a lock nut, lift up the cover and remove the nut: pull the arm from the shaft.
  2.  
  3. Remove the lift gate trim panel, disconnect the wiring harness connector. Remove the motor mounting nuts (inside and outside). Remove the motor.
  4.  
  5. If you must remove the crank arm from the motor, match mark its location. The arm is installed so the wiper blades will stop at a preset position.When installing the wiper arm, the distance between the tip of the blade and the lower window molding should be:

    Colt: 60mm
     
    Vista: 20mm
     

  6.  

 
label.common.footer.alt.autozoneLogo