Chrysler Concorde/Intrepid/LHS/New Yorker/Vision 1993-1997

Receiver Drier

Print

REMOVAL & INSTALLATION



  1. Take the vehicle to a certified shop to have the system discharged properly.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the high pressure refrigerant line retaining nuts/bolts from the filter/drier assembly and carefully separate the lines from the filter/drier.
  6.  
  7. Cap the lines to minimize contamination.
  8.  
  9. Remove the dual pressure switch connection at the filter/drier.
  10.  
  11. Remove the mounting strap bolts and lift the filter-drier from the vehicle. If replacing the filter-drier assembly, transfer the mounting strap to the replacement part.
  12.  

To install:
  1. Replace all O-rings and gaskets with NEW ones. Coat all sealing surfaces with wax free refrigerant oil.
  2.  
  3. Replace the filter/drier with mounting strap and install the mounting strap bolts.
  4.  
  5. Mount the high pressure refrigerant lines to the receiver/drier assembly and install the refrigerant line retaining nuts.
  6.  
  7. Replace the dual pressure switch connection at the filter/drier.
  8.  
  9. Properly charge the A/C system.
  10.  
  11. Connect the negative battery cable.
  12.  

 
label.common.footer.alt.autozoneLogo