Chrysler Concorde/Intrepid/LHS/New Yorker/Vision 1993-1997

Brake Light Switch

Print

REMOVAL & INSTALLATION



  1. Disconnect negative battery cable. Remove the under instrument panel silencer duct.
  2.  
  3. Pull the brake switch assembly rearward off the mounting bracket.
  4.  
  5. Detach the wire harness connector from the switch.
  6.  

To install:
  1. Attach the wire harness connector to the switch.
  2.  
  3. Install the switch in the retaining bracket by aligning the index key on the switch to the slot at the top of the square hole on the mounting bracket.
  4.  
  5. Install the under instrument panel silencer duct.
  6.  
  7. Reconnect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo