Chrysler Concorde/Intrepid/LHS/New Yorker/Vision 1993-1997

Vacuum Reservoir

Print

REMOVAL & INSTALLATION



  1. Disconnect the battery cables, negative first.
  2.  
  3. Remove the battery thermalguard.
  4.  
  5. Remove the battery clamp and battery.
  6.  
  7. Remove the battery tray from the engine compartment.
  8.  
  9. Tag and disconnect the vacuum hoses from the reservoir.
  10.  
  11. Remove the reservoir.
  12.  

To install:
  1. Install the vacuum reservoir.
  2.  
  3. Attach the hoses onto the reservoir in their correct locations.
  4.  
  5. Install the battery tray and tighten the bolts.
  6.  
  7. Install the battery and tighten the clamp.
  8.  
  9. Install the battery thermalguard.
  10.  
  11. Install the battery clamps to the battery.
  12.  

 
label.common.footer.alt.autozoneLogo