Log In
Search suggestions

    My Vehicles

    1996 BMW 328IS 2.8L EFI DOHC 6cyl

    Find a Store

    Select Store

    GET A $25 GIFT CARD FOR EVERY $100 SPENT ON ONLINE SHIP-TO-HOME ORDERS.

    Use Code: GIFTME

    See Details

    Chrysler Concorde/Intrepid/LHS/New Yorker/Vision 1993-1997

    Powertrain Control Module (PCM)

    Print

    REMOVAL & INSTALLATION



    1993-95 Models

    See Figures 1, 2 and 3



    Click image to see an enlarged view

    Fig. Fig. 1: Remove the stud bolt and push pin retaining the PCM-1993-95 models



    Click image to see an enlarged view

    Fig. Fig. 2: The 60-way connector is attached to the back of the PCM on the 1993-95 models



    Click image to see an enlarged view

    Fig. Fig. 3: Powertrain Control Module pin locations and descriptions-1993-95 models

    1. Remove the air cleaner assembly from the engine.
    2.  
    3. Remove the stud bolt and push pin attaching the PCM to the body. The push pin has a center lock. Pull the center lock up to remove the push pin.
    4.  
    5. Lift the PCM up, then detach the 60-way connector.
    6.  
    7. Remove the PCM.
    8.  

    To install:
    1. Attach the 60-way connector on the PCM.
    2.  
    3. Tighten the connector screw to 35 inch lbs. (4 Nm).
    4.  
    5. Install the PCM and tighten the stud bolt to 7 ft. lbs. (10 Nm).
    6.  
    7. Install the push pin. Push down on the center lock of the push pin.
    8.  
    9. Install the air cleaner assembly.
    10.  
    11. Using the DRB III scan tool or equivalent, program the mileage into the PCM.
    12.  

    1996-97 Models

    See Figures 4 and 5



    Click image to see an enlarged view

    Fig. Fig. 4: PCM mounting on the 1996-97 models



    Click image to see an enlarged view

    Fig. Fig. 5: Powertrain Control Module pin locations and descriptions-1996-97 models

    1. Remove the air cleaner assembly from the engine.
    2.  
    3. Remove the PCM 2 40-way connector from the engine computer.
    4.  
    5. Remove the mounting bolts from the PCM bracket, then remove the PCM from the vehicle.
    6.  

    To install:
    1. Attach the PCM to the bracket and tighten to 35 inch lbs. (4 Nm).
    2.  
    3. Plug the 2 40-way connector into the engine computer.
    4.  
    5. Install the air cleaner assembly.
    6.  
    7. Using a DRB III scan tool or equivalent, program the milage into the PCM.
    8.  

     
    AutoZone Logo