Chrysler Concorde/Intrepid/LHS/New Yorker/Vision 1993-1997

Fenders

Print

REMOVAL & INSTALLATION



See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Front fender installation

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the headlamp assembly.
  4.  
  5. Remove the front bumper fascia as outlined in this section, as necessary for clear access to the fender.
  6.  
  7. Remove the bolt retaining the fender to the rocker panel.
  8.  
  9. From inside the door opening, remove the bolts retaining the fender to the hinge pillar brackets.
  10.  
  11. Remove the bolts retaining the fender to the radiator closure panel.
  12.  
  13. From inside the engine compartment, remove the bolts retaining the fender to the inner wheelhouse panel.
  14.  
  15. Separate the fender from the vehicle.
  16.  

To install:
  1. Position the fender to the vehicle.
  2.  
  3. From inside the engine compartment, install the bolts retaining the fender to the inner wheelhouse panel.
  4.  
  5. Install the bolts retaining the fender to the radiator closure panel.
  6.  
  7. From inside the door opening, install the bolts retaining the fender to the hinge pillar brackets.
  8.  
  9. Install the bolt retaining the fender to the rocker panel.
  10.  
  11. Install the front bumper fascia as outlined in this section.
  12.  
  13. Install the headlamp assembly.
  14.  
  15. Connect the negative battery cable.
  16.  

 
label.common.footer.alt.autozoneLogo