Chrysler Concorde/Intrepid/LHS/New Yorker/Vision 1993-1997

Blower Motor Power Module

Print

REMOVAL & INSTALLATION



See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: The blower motor module is located behind an access cover near the glove box door

  1. Remove the lower right under panel access cover silencer duct.
  2.  
  3. Detach the wiring connector on the blower motor module.
  4.  
  5. Remove the blower motor module retaining screws.
  6.  
  7. Pull the blower module out of the heater housing.
  8.  

To install:
  1. Install the blower module into the heater housing.
  2.  
  3. Attach the blower motor module with the retaining screws.
  4.  
  5. Attach the wiring connector on the blower motor module.
  6.  
  7. Install the lower right under panel access cover silencer duct.
  8.  

 
label.common.footer.alt.autozoneLogo