Chrysler Concorde/Intrepid/LHS/New Yorker/Vision 1993-1997

Windshield Wiper Switch

Print

REMOVAL & INSTALLATION



  1. Tilt the steering column up and remove the six screws holding the lower column shroud.
  2.  
  3. Tilt the column down and remove the upper shroud.
  4.  
  5. Tilt the column up and remove the one steering column tilt lever screw at the base of the lever.
  6.  
  7. Remove the lever and lower the shroud.
  8.  
  9. Using a flat bladed tool, in place of the lever, tilt the column down. Remove the two mounting screws on the switch and then remove the switch.
  10.  
  11. Remove the wiring from the hooks, then disconnect the two electrical harnesses on the switch. Remove the switch.
  12.  

To install:
  1. Attach the harnesses to the switch.
  2.  
  3. Place the switch into position, and tighten the mounting screws in the order of removal.
  4.  
  5. Install the lever and upper shroud.
  6.  
  7. Install the lower shroud.
  8.  
  9. Test the lever operation.
  10.  

 
label.common.footer.alt.autozoneLogo