Chrysler Concorde/Intrepid/LHS/New Yorker/Vision 1993-1997

Seat Belt Systems

Print

REMOVAL & INSTALLATION



Front Seat Belt Buckle

See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Front seat belt buckle installation

  1. Remove the front seat, as necessary, to gain access to the anchor bolt.
  2.  
  3. Remove the bolt holding the buckle and reinforcement to the front seat track.
  4.  
  5. Separate the belt and buckle from the vehicle.
  6.  

To install:
  1. Position the belt and buckle in the vehicle.
  2.  
  3. Install the bolt holding the buckle and reinforcement to the front seat track and tighten securely.
  4.  
  5. Install the front seat, if removed.
  6.  

Front Seat Belt Turning Loop

See Figure 2



Click image to see an enlarged view

Fig. Fig. 2: Front seat belt turning loop installation

  1. On the back of the turning loop cover, disengage the clips holding the cover to the turning loop.
  2.  
  3. Separate the cover from the turning loop.
  4.  
  5. Remove the bolt holding the buckle and reinforcement to the front seat track.
  6.  
  7. Remove the bolt holding the turning loop to the shoulder belt height adjuster.
  8.  
  9. Separate the turning loop from the adjuster.
  10.  

To install:
  1. Position the turning loop to the adjuster.
  2.  
  3. Install the bolt holding the turning loop to the shoulder belt height adjuster and tighten securely.
  4.  
  5. Install the cover to the turning loop.
  6.  

Front Seat Belt Retractor

See Figure 3



Click image to see an enlarged view

Fig. Fig. 3: Front seat belt retractor installation

  1. Remove the shoulder belt turning loop from the height adjuster.
  2.  
  3. Remove the upper B-pillar trim.
  4.  
  5. Remove the lower B-pillar trim.
  6.  
  7. Remove the push-in fastener holding the seat belt retractor to the floor below the B-pillar.
  8.  
  9. Separate the seat belt retractor from the vehicle.
  10.  

To install:
  1. Position the seat belt retractor to the vehicle.
  2.  
  3. Install the push-in fastener holding the seat belt retractor to the floor below the B-pillar.
  4.  
  5. Install the lower B-pillar trim.
  6.  
  7. Install the upper B-pillar trim.
  8.  
  9. Install the shoulder belt turning loop to the height adjuster.
  10.  

Front Shoulder Belt Adjuster

See Figure 4



Click image to see an enlarged view

Fig. Fig. 4: Front shoulder belt adjuster installation

  1. Remove the upper B-pillar trim.
  2.  
  3. Remove the bolts holding the shoulder belt adjuster to the B-pillar.
  4.  
  5. Separate the adjuster from the B-pillar.
  6.  

To install:
  1. Position the adjuster on the B-pillar.
  2.  
  3. Position the seat belt retractor to the vehicle.
  4.  
  5. Install the bolts holding the shoulder belt adjuster to the B-pillar and tighten securely.
  6.  
  7. Install the upper B-pillar trim.
  8.  

Rear Seat Belt Buckle
  1. Remove the rear seat cushion.
  2.  
  3. Remove the rear seat back.
  4.  
  5. Separate the seat buckle or belt from the stud on the floor.
  6.  

To install:
  1. Place the seat buckle or belt anchor over the stud on the floor.
  2.  
  3. Install the rear seat back.
  4.  
  5. Install the rear seat cushion.
  6.  

Rear Seat Retractor

See Figure 5



Click image to see an enlarged view

Fig. Fig. 5: Rear seat belt retractor installation

  1. Remove the upper quarter trim panels.
  2.  
  3. Remove one lower quarter trim panels.
  4.  
  5. Remove one parcel shelf trim cover.
  6.  
  7. Remove the bolt holding the lower seat belt anchor to the floor below the quarter trim.
  8.  
  9. Remove the bolt holding the belt retractor to the shelf panel.
  10.  
  11. Separate the belt from the vehicle.
  12.  

To install:
  1. Position the belt in the vehicle.
  2.  
  3. Install the bolt holding the belt retractor to the shelf panel and tighten securely.
  4.  
  5. Install the bolt holding the lower seat belt anchor to the floor below the quarter trim and tighten securely.
  6.  
  7. Install the parcel shelf trim cover.
  8.  
  9. Install the upper quarter trim panels.
  10.  

 
label.common.footer.alt.autozoneLogo