Chrysler Concorde/Intrepid/LHS/New Yorker/Vision 1993-1997

Trunk Lid Applique Lamp

Print

REMOVAL & INSTALLATION



See Figures 1, 2, 3, 4, 5 and 6



Click image to see an enlarged view

Fig. Fig. 1: After removing the interior lining, remove the nuts from the underside of the lid



Click image to see an enlarged view

Fig. Fig. 2: Detach the wiring leading to the lamp



Click image to see an enlarged view

Fig. Fig. 3: Pull the unit from the trunk lid



Click image to see an enlarged view

Fig. Fig. 4: Turn the lamp bulb sockets till they separate from the lamp



Click image to see an enlarged view

Fig. Fig. 5: Pull the bulb out if replacement is necessary



Click image to see an enlarged view

Fig. Fig. 6: When installing the unit, insert the wiring into the access hole through the lid first and secure the grommet

  1. Release the trunk latch and open the trunk lid.
  2.  
  3. Remove the push-in fasteners holding trunk lid lining to the back of the trunk lid.
  4.  
  5. Position trunk lid lining out of the way.
  6.  
  7. Separate the lamp wiring from the trunk lid harness.
  8.  
  9. Remove the nuts holding the applique lamp to the trunk lid.
  10.  
  11. Remove the wiring harness grommet from the hole in the trunk lid.
  12.  
  13. Pull the wire harness through the hole in the lid and remove the lamp.
  14.  

To install:
  1. Place the lamp into position on the vehicle.
  2.  
  3. Insert the wire harness into the trunk lid.
  4.  
  5. Install the harness grommet in hole in the trunk.
  6.  
  7. Place the lamp into position on the trunk lid.
  8.  
  9. Install the nuts to retain the lamp into position on the trunk.
  10.  
  11. Engage the lamp wire connector to the trunk lid harness.
  12.  
  13. Place the trunk lid lining into position.
  14.  
  15. Install the push-in fasteners to hold the trunk lid liner to the back of the trunk lid.
  16.  

 
label.common.footer.alt.autozoneLogo