Chrysler Concorde/Intrepid/LHS/New Yorker/Vision 1993-1997

Pump Reservoir

Print

REMOVAL & INSTALLATION



See Figures 1, 2, 3 and 4



Click image to see an enlarged view

Fig. Fig. 1: The power steering reservoir is located near the battery



Click image to see an enlarged view

Fig. Fig. 2: Remove the power steering return hose



Click image to see an enlarged view

Fig. Fig. 3: Remove the 4 fasteners attain the battery tray to the body and frame



Click image to see an enlarged view

Fig. Fig. 4: Remove the screw attaching the reservoir to the frame rail

  1. Raise and safely support the vehicle.
  2.  
  3. Position a drain pan under the reservoir and disconnect the hoses.
  4.  
  5. Lower the vehicle.
  6.  
  7. Disconnect the battery cables and remove the battery.
  8.  
  9. Remove the battery tray, reservoir retaining bolts and reservoir.
  10.  

To install:
  1. Install the reservoir and tighten the bolts to 60 inch lbs. (7 Nm).
  2.  
  3. Install the battery tray and battery.
  4.  
  5. Raise and safely support the vehicle.
  6.  
  7. Connect the power steering hoses to the reservoir.
  8.  
  9. Lower the vehicle, connect the battery cables and bleed the power steering system.
  10.  

 
label.common.footer.alt.autozoneLogo