Chrysler Concorde/Intrepid/LHS/New Yorker/Vision 1993-1997

Main and Motor Pump Relay

Print

REMOVAL & INSTALLATION



See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: The main and pump relays are attached to the side of the power distribution center

The main relay and pump relays are both serviced together as an assembly, with the mounting bracket. They are mounted to a bracket that is attached to the side of the Power Distribution Center (PDC).

  1. Hold the relays with one hand, and pull straight down on the wiring harness connectors, until they are free from the relays. Do not twist the connectors.
  2.  
  3. Remove the relays and bracket assembly from the side of the PDC.
  4.  

To install:
  1. Mount the relays and bracket assembly to the side of the PDC, making sure that the relay bracket is securely latched to the PDC.
  2.  
  3. Holding the relays with one hand, push the wiring harness connector straight onto the terminals of the relay. Make sure the connector is fully seated onto the terminals of the relay.
  4.  

 
label.common.footer.alt.autozoneLogo