Chrysler Front Wheel Drive Cars 4-CYL 1981-1995 Repair Information

Diagnosis and Testing

Print

See Figures 1, 2 and 3

All diagnosis and testing should be perform in order according to the service charts below. Perform all test in the order stated by the diagnosis charts. Battery voltage must be 12 volts before starting all test procedures.



Click image to see an enlarged view

Fig. Fig. 1: The ignition coil is equipped with only three electrical connections-the negative terminal, the positive terminal and the coil-to-distributor high tension cable



Click image to see an enlarged view

Fig. Fig. 2: Follow this system test to diagnose ignition problems



Click image to see an enlarged view

Fig. Fig. 3: Ignition system test continued-note that the connector terminals are identified at the bottom of these charts

 
label.common.footer.alt.autozoneLogo