Chrysler Front Wheel Drive Cars 4-CYL 1981-1995 Repair Information

Controller Anti-lock Brake (CAB) Module

Print

The CAB is mounted on the top of the right front frame rail and uses a 60-way system connector.

REMOVAL & INSTALLATION



See Figures 1 and 2



Click image to see an enlarged view

Fig. Fig. 1: The Control Anti-lock Brake (CAB) module is attached to the ECU by means of a 60-way connector-Dynasty



Click image to see an enlarged view

Fig. Fig. 2: The Controller Anti-lock Brake (CAB) module on the Premier is mounted to the right front shock tower

  1. Turn the ignition switch OFF .
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Detach the wiring harness connector 60-way connector from the CAB.
  6.  
  7. Remove the CAB module mounting bracket-to-inner fender bolts.
  8.  
  9. Remove the CAB from the vehicle.
  10.  

To install:
  1. Install the CAB module and bracket into the vehicle. Secure the CAB in place with the mounting screws.
  2.  
  3. Attach the 60-way connector to the CAB.
  4.  
  5. Connect the battery cable.
  6.  

 
label.common.footer.alt.autozoneLogo