Chrysler Front Wheel Drive Cars 4-CYL 1981-1995 Repair Information

License Plate Lights

Print

REMOVAL & INSTALLATION



See Figures 1, 2 and 3

Click image to see an enlarged view

Fig. Fig. 1: Remove the license plate light assembly retaining screws, then ...



Click image to see an enlarged view

Fig. Fig. 2: ... extract the license light assembly from the bumper or rear fascia



Click image to see an enlarged view

Fig. Fig. 3: Once the light assembly is removed, the light bulb can be extracted

  1. Remove the screws holding the license plate lighting assembly onto the vehicle.
  2.  
  3. Remove the lighting assembly from the rear bumper or fascia body panel.
  4.  
  5. Remove the light bulb socket from the lighting assembly.
  6.  
  7. Pull the used light bulb from the socket.
  8.  

To install:
  1. Insert the new bulb into the socket and press in until fully seated.
  2.  
  3. Install the socket into the license plate lighting assembly.
  4.  
  5. Install the license plate lighting assembly into the fascia or bumper.
  6.  
  7. Install the screws to hold the lamp in the vehicle.
  8.  

 
label.common.footer.alt.autozoneLogo