Chrysler Front Wheel Drive Cars 4-CYL 1981-1995 Repair Information

Back-Up Light Switch

Print

REMOVAL & INSTALLATION



See Figure 1

Click image to see an enlarged view

Fig. Fig. 1: Location of the back-up light switch

The back-up light switch is located on the top of the transaxle.

  1. Detach the electrical connector, then unscrew the switch by engaging the flats with an open-end wrench.
  2.  
  3. Install in reverse order (replace the gasket or O-ring as necessary), being especially careful to start the switch into the threaded bore of the transaxle without forcing it, to prevent cross-threading.
  4.  

 
label.common.footer.alt.autozoneLogo