Chrysler Front Wheel Drive Cars 6-CYL 1988-1995 Repair Information

Grille

Print

REMOVAL & INSTALLATION



See Figures 1, 2, 3, 4, 5 and 6

This is a general procedure and applicable to all vehicles covered by this information.

  1. The grille is held in place by numerous trim screws, most often hidden from plain view.
  2.  
  3. Inspect the grille until all mounting screw locations have been identified. Often times, the screws can only be accessed with the hood open. Some vehicles or model/years may require the removal of other front end components (such as headlights or front bumper fascia) before the grille can be removed from the vehicle.
  4.  
  5. Remove the mounting screws.
  6.  
  7. Pull the grille out of the front of the vehicle.
  8.  



Click image to see an enlarged view

Fig. Fig. 1: The grille assembly on Premier and Monaco vehicles



Click image to see an enlarged view

Fig. Fig. 2: The grille assembly on LeBaron Sedan, Acclaim and Spirit vehicles



Click image to see an enlarged view

Fig. Fig. 3: The grille assembly on New Yorker and Dynasty vehicles



Click image to see an enlarged view

Fig. Fig. 4: The grille assembly on LeBaron Coupe/Convertible vehicles



Click image to see an enlarged view

Fig. Fig. 5: The grille assembly on Sundance and Shadow vehicles



Click image to see an enlarged view

Fig. Fig. 6: The grille assembly on Imperial and Fifth Ave. vehicles

To install:
  1. Position the grille in place and line the mounting screw holes up with the grille holes.
  2.  
  3. Install all mounting screws securely.
  4.  
  5. Install any components removed for access to the grille mounting screws.
  6.  

 
label.common.footer.alt.autozoneLogo