Chrysler Front Wheel Drive Cars 6-CYL 1988-1995 Repair Information

Seat Belt Systems

Print

REMOVAL & INSTALLATION



Front

See Figure 1

  1. Remove the necessary trim panel(s).
  2.  
  3. Remove the bolt holding seat belt retractor to B-pillar.
  4.  
  5. Separate retractor from the vehicle.
  6.  



Click image to see an enlarged view

Fig. Fig. 1: The common front seat belt system components

To install:
  1. Install the retractor into the vehicle.
  2.  
  3. Install the seat belt retractor-to-B-pillar attaching bolt and tighten to 40 ft. lbs. (54 Nm).
  4.  
  5. Install the trim panels which were removed.
  6.  

Rear

See Figure 2

  1. Remove the necessary trim panel(s).
  2.  
  3. Remove the bolt holding lap belt to floor at wheelhouse kickup.
  4.  
  5. Remove the bolt holding seat belt retractor to quarter panel.
  6.  



Click image to see an enlarged view

Fig. Fig. 2: The common rear seat belt system components

To install:
  1. Install the bolt to hold the seat belt retractor to the quarter panel. Tighten the seat belt retaining bolts to 40 ft. lbs. (54 Nm).
  2.  
  3. Install the bolt holding the lap belt to the floor at the wheelhouse kickup.
  4.  
  5. Install the necessary trim panel(s).
  6.  

 
label.common.footer.alt.autozoneLogo