Chrysler Front Wheel Drive Cars 6-CYL 1988-1995 Repair Information

Dome/Map Lights

Print

REMOVAL & INSTALLATION



Spirit, Acclaim and LeBaron Sedan

See Figure 1

  1. Remove the lens by inserting a large paper clip or wire, with a hook on the end, into the hole in the lens and pull downward.
  2.  
  3. Remove the light bulb by pulling firmly toward the front of the vehicle.
  4.  



Click image to see an enlarged view

Fig. Fig. 1: Use a paper clip shaped into a hook on one end to open the light lens-Spirit, Acclaim and LeBaron sedan

To install:
  1. Install the new light bulb by pushing firmly into the receptacle.
  2.  
  3. Snap the lens into position taking care to orient the tabs on the lens with the slots in the housing and snap into place.
  4.  

New Yorker, Dynasty, Imperial and Fifth Ave.

  1. Remove the lens by inserting a flat blade tool between the round end of the lamp lens and housing. Pry the lens from the housing. Pivot the lens and remove it.
  2.  
  3. Pull the used light bulb out of the light socket.
  4.  

To install:
  1. Install a new bulb.
  2.  
  3. Position the lens into the housing by locating the lens pivot and snap it into place.
  4.  

Daytona, Sundance, Shadow and LeBaron Coupe/Convertible

See Figure 2

  1. Remove the lens by inserting a flat-bladed prytool into the slot located alongside of the lens. Once the prytool is inserted, pry the lens to the side and swing it down as it unhooks from the housing edge.
  2.  
  3. Remove the light bulb by pulling straight down.
  4.  



Click image to see an enlarged view

Fig. Fig. 2: Once the lens cover has been removed, the light bulb can be replaced with a new one

To install:
  1. Install the new light bulb by pushing firmly into the receptacle.
  2.  
  3. Snap the lens into position taking care to orient the tabs on the lens with the slots in the housing.
  4.  

 
label.common.footer.alt.autozoneLogo